Fully Automatic Water Level Controller for
Motor Pump Operated by Starter - Tank only
This controllers do not need operator for performing start and stop operations. Fully automatic water level controller switches ON the motor when the water level in the tank becomes low (desired prefixed lower limit). It switches OFF the motor once the tank becomes full (prefixed higher limit).
· This controller unit has a semi-automatic function (Manual ON and Auto OFF function). Just keep the controller in MANUAL mode for the motor to get switched ON and then change it to AUTO mode for Automatic OFF.
· Has MANUAL mode and AUTO mode functions. In AUTO mode, AUTO ON and AUTO OFF operation occurs. In MANUAL mode, the motor pump will be constantly running. By changing to AUTO mode, automatic operations occur.
· Has Low Voltage/High Voltage and Dry Run Protection and Power ON, Motor ON and TANK FULL LED indications.
· Suitable for Borewell to Tank set up (Underground water to Overhead tank set up).
· Suitable for motor pump 0.5 hp to 3 hp operated by a starter (Submersible/DOL) - Single Phase AC230V.
· Any Type of AC motor (Single phase motor - Monoblock, Jet Pump, Submersible,etc.) upto 3 HP that are operated by starter. If your motor is operated by a starter panel with red and green button having both coil and capacitor inside (Eg. Submersible starter) or if it is a Direct On Line (DOL) starter with coil alone, this model will be suitable. |
||||||
·
|
Weight | 2.1 kg |
---|---|
Dimensions | 122 × 145 × 321 cm |